Is garage door maintenance on your spring cleaning list? It should be. In winter, with the colder climates, the garage door needs to work more difficult putting a pressure on the springs, bolts and track that keep your garage door working smoothly. When the door is working we take the fact that it opens and closes for given but a bit of TLC can go a long way in ensuring that it stays that way.
The UK may be having one of the worst summers on record; in April we had twice the average rainfall in the UK, June was the wettest month on record and in July some parts of the UK saw a month’s rain fall in 24 hours. With all this rain it’s still no reason to be putting that long list of spring cleaning on the back burner. Particularly as the long term projection anticipates a lot more rain.
Garage door maintenance shouldn’t be complicated, and it should not take the whole weekend to ensure that the garage door will still be operating in the years to come so that should not be any reason to put it off.
If your garage door isn’t working effectively, if it sticks, jams or stutters, the tracks may require a little bit of maintenance. Roller garage doors and up and over garage doors both run on tracks so it’s essential to inspect that they are clean and in working order on a regular basis.
With the garage door shut, inspect that the bolts and screws that secure the brackets running along the track are tight. The screws can often become loose and used with routine use. By tightening up the screws this will probably fix any issue with the garage door rattling or extreme swinging as the door closes.
After making sure that all the bolts are tight, and replacing ones that are too worn, thoroughly eliminate the accumulation of dirt and gunk running along the track. You’ll require to use an action ladder to be able to see the inside of the track appropriately and to safeguard your fingers from getting jammed. After you’ve cleaned up the track keep in mind to re-oil the track and the rollers to ensure a smooth opening and closing of your roller garage door.
As you cleaned up the track you would have discovered any bumps and damages in the track which would avoid the door opening efficiently. Even a small dent can trigger problems in the future so it’s important to knock these damages back in to position. Using a hammer and a slat of wood, carefully straighten the track, moulding the damage into location.
For anything a little bit more complex look for a garage door expert, especially if you believe that the springs are involved. You do not want to harm the garage door beyond repair or trigger damage to yourself.
Post Sponsored by http://glaziersharrow.co.uk/