Measuring Tips For Curtains

In the existing financial scenario, it’s an excellent idea to be prudent whenever and any place you can be. Do It Yourself is a natural frugal stepping point for the home improvement lover, but there are a number of pitfalls for a rookie or newbie to fall under. Measurement is among the primary ones, as if the initial measurement is wrong then it doesn’t matter how good a task you do at the end of the day, the task is doomed from the beginning.

Economical options for curtains is to either make them yourself or to buy ready made drapes online, and with both these choices, the measurement is crucial towards the success of the project. So, here is an useful guide on how to measure for curtains:

Measure The Width

A common mistake when measuring the width for curtains is to measure the window instead of the curtain track or pole. Unlike blinds, curtains require to be determined so that the hang over the width of the window, indicating a precise measurement of the window width will result in too brief curtains that won’t cover the entire window.

If you currently have a drape pole in place, then determine the length of the pole in between the finials, which are the decorative ends of the pole.

If you have drape rails, merely measure the length of the rail. If your rail has an overlap, then include the length of the overlap to the length of the rail.

When fitting a brand-new track or pole, make certain to extend the width of the window by 15 to 20 cm on either side of the window, consequently preventing the issue of having drapes that will not cover the window.

Procedure The Drop

The drop of your drapes is the length which you ‘d like them to be. This is totally dependent on your choice, and it is presently fashionable to have long and cascading curtains indicating that the drop rolls over onto the floor. Trends aside though, you can follow these 3 typical measurement guide:

A: Full length– Approximately 1.5 to 3cm above floor level.

B: Above radiator- The curtains end 1 to 3cm above the radiator.

C: Below window sill- Usually 15cm are contributed to the measurement of rail to window sill.

If you’re measuring from a drape pole, keep in mind to measure from the top track or bottom of the drape rings to the wanted drop length of your curtains.

For eyelet drapes also called Tap Top, you’ll need to take the measurement from the very top of the curtain pole.

The measurement of the width of the drape needs to be extremely exact and is the measurement which can make a break the success of the task, whereas the measurement of the drop has more flexibility and gives you the chance to experiment with different length concepts. If you’re uncertain the length of time you want your drapes to be, attempt visualising the end result, using an extra bed sheet to assist you. Just highlight the measurement alternatives on the bed sheet using a non-washable fabric marker, and ask somebody to hold up the sheet in front of the window, then stand back and observe. You can likewise fold up the sheet to give a much better take a look at how the curtains will search in that particular length.

Post Sponsored by

Looking after Laminate Kitchen Worktops

Laminate kitchen area worktops have actually been around for almost 50 years, and is still the most common product for kitchen area worktops. It is cheap, tough, hard wearing and offered in a massive choice of patterns and colours, consisting of replica stone and wood.

Nevertheless, despite it’s toughness, laminate kitchen area worktops do need care to guarantee look their best for as long as possible.

Laminate Worktop Care– Do’s and Don’ts.

  • Do not use cleaners with abrasives, like ‘cream’ type cleaners– they will harm the surface.
  • Do use a moist cloth or non-abrasive kitchen and multi surface area cleaners, making sure the surface is dried later on.
  • Don’t position hot items straight onto the worktop. They will tend to leave blister marks.
  • Do not cut anything straight on the laminate worktop surface area. Knives and other implement will leave scratches.
  • Do not drag pans or other products– especially metal and unglazed pottery– across the surface, as they too can leave scratches.
  • Don’t use polish with a wax included as it will dull the surface area– although you can usually clean this off.

Dealing with Marks: Streaks.

Dark coloured worktops in some cases appear streaky after cleaning up. Use a small amount of multi surface area cleaner on a tidy fabric to eliminate the residue and bring back the shine.

Dealing with Spills and Stains.

Laminate kitchen worktops withstand staining from most family chemicals. Some products with really strong colours can however leave a permanent stain. Wipe off red wine, beetroot, grape and berry juices right away, and clean with water or cleaner. Focused bleach can eliminate the colour from darker worktops, and leave yellow stains on lighter worktops, so need to also be eliminated with tidy water as soon as possible. Spills such as nail polish or super glue must be gotten rid of prior to they dry. Usage nail polish remover or a suitable solvent, making sure the surface area is thoroughly cleaned up later on.

Some pens can leave permanent marks, specifically felt pointer and marker pens. Try to keep these away from worktops, and be aware some will go through a single sheet of paper.

If a stain will not vanish with normal Surface Cleaner, attempt utilizing methylated spirits, or 2 or 3 light rubs with a cream cleanser. You can likewise use diluted bleach (1 part bleach to 8 parts water), however do not leave for more than 3 minute, and make sure the surface is rinsed completely afterwards, however you do run the risk of whitening the surface.

Dealing with a scratched laminate worktop.

Laminate cooking area worktop surfaces will endure normal daily wear and tear effectively, but can be damaged by scratching or cutting with utensils, knives and unglazed pottery. Darker colours will show scratches quicker than lighter colours as will high gloss surface areas. Dark coloured worktops and high gloss worktops tend to show scratches more quickly, so bear this in mind if when selecting a brand-new or replacement cooking area worktop.

To reduce scratching, constantly raise things from the surface area, not drag or move the, and use cutting boards or trivets whenever required.

Laminate Worktop Lifespan.

With good care, laminate kitchen area worktops can easily last 20 years or more in perfect condition. Even if it is marked or damaged, a worktop can normally be replaced without a whole brand-new kitchen area, which is generally a more affordable choice.

Post Sponsored by

Don’t Delay, Maintain Your Garage Door Today

Is garage door maintenance on your spring cleaning list? It should be. In winter, with the colder climates, the garage door needs to work more difficult putting a pressure on the springs, bolts and track that keep your garage door working smoothly. When the door is working we take the fact that it opens and closes for given but a bit of TLC can go a long way in ensuring that it stays that way.

The UK may be having one of the worst summers on record; in April we had twice the average rainfall in the UK, June was the wettest month on record and in July some parts of the UK saw a month’s rain fall in 24 hours. With all this rain it’s still no reason to be putting that long list of spring cleaning on the back burner. Particularly as the long term projection anticipates a lot more rain.

Garage door maintenance shouldn’t be complicated, and it should not take the whole weekend to ensure that the garage door will still be operating in the years to come so that should not be any reason to put it off.

If your garage door isn’t working effectively, if it sticks, jams or stutters, the tracks may require a little bit of maintenance. Roller garage doors and up and over garage doors both run on tracks so it’s essential to inspect that they are clean and in working order on a regular basis.

With the garage door shut, inspect that the bolts and screws that secure the brackets running along the track are tight. The screws can often become loose and used with routine use. By tightening up the screws this will probably fix any issue with the garage door rattling or extreme swinging as the door closes.

After making sure that all the bolts are tight, and replacing ones that are too worn, thoroughly eliminate the accumulation of dirt and gunk running along the track. You’ll require to use an action ladder to be able to see the inside of the track appropriately and to safeguard your fingers from getting jammed. After you’ve cleaned up the track keep in mind to re-oil the track and the rollers to ensure a smooth opening and closing of your roller garage door.

As you cleaned up the track you would have discovered any bumps and damages in the track which would avoid the door opening efficiently. Even a small dent can trigger problems in the future so it’s important to knock these damages back in to position. Using a hammer and a slat of wood, carefully straighten the track, moulding the damage into location.

For anything a little bit more complex look for a garage door expert, especially if you believe that the springs are involved. You do not want to harm the garage door beyond repair or trigger damage to yourself.

Post Sponsored by

Simple DIY steps to making your home more secure

Keeping your house safe and secure is a typically overlooked element of Do It Yourself– however with a couple of easy actions you can ensure your home, liked ones and ownerships are as safe as they can be. All of these security upgrades can be tried by the DIYer, so review your house security, and think of updating now, while daylight stretches well into late night.

Doors and locks

Ensure your doors and locks comply with these requirements:

Front doors:

  1. Should be strong wood at least 44mm thick
  2. Fitted with a British Standard five-lever mortise lock
  3. Also fitted with an automated dead-locking rim-lock

Back entrances

  1. Need to be solid wood at least 44mm thick
  2. Have a five-lever mortise sash lock
  3. Be fitted with two mortise bolts/surface mounted press bolts.

Make sure any glazing in your doors is strengthened 6.4 mm glass, at least.

If your doors do not fulfill these requirements, then it’s time to think of upgrading … and all of the tasks, from fitting locks to hanging doors can be part of the DIYer’s jobs-to-do list.


There are so many security gadgets for windows, it’s impossible to note them all, but ensure you fit either lockable manages or easy security locks to your casement, sash or uPVC windows. If ventilation or child security is a concern, you can also purchase systems that lock windows in an employment opportunity. Consider your circumstance, and buy the proper lock for what you require.

More security pointers

  1. Gravel drives will always make a burglar reconsider, as it is essentially impossible to approach a home quietly.
  2. Having a noticeable burglar alarm and security lighting on the front, back and sides of your house are likewise an excellent idea. Make sure they are fitted out of the reach of any burglar. You may want to get a professional in to fix security lighting and an alarm, but there are also great deals of systems out there suitable for the DIYer to set up.
  3. Motion sensitive lighting should likewise be placed so it doesn’t intensify the neighbours, and won’t be activated by family pets and wildlife if possible.
  4. It’s also a great idea to get involved with the Neighbourhood Watch, or other comparable groups. Making your location more protected makes your home more protected.

And lastly …
People tend to improve their security after their houses– or their neighbours’– have, regrettably, been targeted. Don’t wait for the worst to occur, and update your house now, for real assurance and security.

Post Sponsored by Fleet Glaziers – Emergency Glazier in Fleet.

Step ladder safety when interior painting

Although step ladders are exceptionally easy to use, lots of accidents happen because of individuals’s negligence when painting their walls at home.

It might seem obvious, however you need to consider how to securely use them prior to in fact beginning a DIY task. There are some apparent security rules that you need to always keep in the back of your mind.

  1. Select a ladder suitable for interior painting. This needs an action ladder with a large spreader brace.

Select one that is a suitable shape for your particular space size. There are many different action ladders available on the market– varying from 2 tread action ladders all the way to 12 tread step ladders– so select thoroughly.

  1. Open your action ladder out as far out possible before locking it in.
  2. Grip the sides firmly as you climb, constantly keeping both hands there. Your body must, likewise, remain in the centre of the ladder’s sides at all times.
  3. Keep your weight equally distributed– and never ever lean. If something requires reassessing at your side, just climb down and reposition the action ladder properly.
  4. Never sit on a ladder or stand in an unbalanced position– always stand.
  5. Don’t use the top two rungs on your step ladders. The top platform must not be used.

You can be damaged both mentally and physically in falls from action ladders. It will likewise cause significant upset to friends and family.

Avoid careless mistakes at all expenses. DIY mishaps can be quickly avoided if these simple safety measures are followed.

Post Sponsored by Farnborough Glaziers – Your Local Glazier.

Five Advantages of Using Skylights in Your Home

Nobody can reject the advantages of sunshine. It can add heat and brightness into practically any space or location of your house. Whether you’re searching for a method to light up your room (and mood) or you simply want to make a statement in particular locations of your home, setting up skylights can be the perfect option.

There are a few distinct advantages of natural light when compared to basic bulbs and tube lights, continue reading to understand these terrific benefits.

1) Morale Boost

Many people will agree that they remain in much better spirits when springtime begins to change the gloominess of winter season. But this moral improving affect is not because of the change in temperature level. What many individuals do not comprehend is that there is a scientific description for this. Many people experience a winter season condition referred to as seasonal depression (SAD), and the biggest cause of this condition is an absence of exposure to the sun. Sunshine enhances the body’s production of serotonin, which in turn enhances our state of mind. Skylights can enable direct exposure to the sunlight that most people would never ever get during the winter season. As a result, it supplies the best boosts for your mood and morale.

2) Visual Impact

Natural skylights use a lot more than some extra sunshine into the spaces. Among the most significant advantages is that they will make your room or any other location a bit more spacey. By brightening up the corners and lowering shadows throughout the room it will make even small rooms seem a bit more open, airy, and larger than they actually are. It’s a fantastic method to make cramped or claustrophobic rooms feel comfortable and roomy– whatever rooms of the home they might be.

3) Save Money

Not just skylights can assist lower the energy expense for lighting the spaces throughout the daytime, however they can likewise conserve on cooling and heating costs in a big way. In winter season, they can help lower energy intake by making the house feel warmer. Vented skylights can be an incredible aid throughout the hottest months of summer season. When heat increases, the skylights can be vented in order to enable the heat to go out. It will get rid of warm air from the house so the cooling units have the ability to operate more effectively.

4) Better Resale Value

You’ll get a significant ROI (return on investment) for the cash that is spent installing skylights in your home, when you choose to offer or lease your house. It’s one of those affordable yet highly efficient financial investments you can make on home improvement that will offer a sufficient return. To make a long story short, almost all individuals like natural lighting. Big windows and skylights are attractive to prospective purchasers and it increases the worth of the home.

5) Greener Living

People around the world are taking steps to restrict their “carbon footprint”. Skylights are among the many ways for a typical property owner to play his/her part for saving energy. Whether it’s decreasing the requirement for gas to warm your home in winter season or electrical power to light up your spaces, skylights can include a lot of “green” value to almost any home or office throughout the year. Not only, you are playing your function in safeguarding the planet, however you’re likewise saving cash on energy expenses in the process.

All things thought about, it’s tough to disagree with the many benefits skylights can bring to your home or office, from ambiance to energy performance, skylights can include a lot to your house.

Post Sponsored by

5 Easy Peasy DIY Ideas to Transform Your Bedroom

Whether you crave a luxurious boudoir or simply a place to lay your head each night, there are a plethora of methods you can change your bed room into an unique and welcoming space. A number of these DIY ideas are basic, cheap and can be completed within a weekend, so you won’t need to hire the builders!

Head’s Up

Making your own headboard is surprisingly simple, and can give a bed room a remarkable and amazing focal point. There are lots of different methods you can develop your own board, from using fabric to cover foam on a board backing, to the somewhat less standard repurposing of old wood.

Using discovered materials such as old doors or wooden pallets can bring impact and texture to your bedroom. For a distinct take, try gluing twine or rope across an old door, before protecting to your wall using drywall hooks.

Painted Furniture

Changing an old chest of drawers or bedside table can truly brighten up your bedroom. If you don’t have a piece that you’re ready to revamp, head to your local flea market or car boot fair to pick up inexpensive furnishings you can try out.

Sand down completely to eliminate any existing varnish and wipe tidy, leaving to dry entirely before painting with a wood guide. Choose a water-based acrylic paint that’s ideal to use on wood, and test on a little patch first such as the back of a drawer.

One of the excellent advantages of painting your own furnishings is that you can be as creative as you like with the finish. Cover in 2 or three coats for a dense, refined appearance, apply with a sponge or rag for a mottled appearance, or sand over painted locations to give a worn, shabby-chic feel– the option is yours.


Your flooring, that is. A great way to bring a sense of texture and drama into a space is to use up old carpet and gown the flooring boards underneath.

You will need to work with a commercial sander or floor scrubber to ensure the floorboards are left tidy, smooth and devoid of residue, but aside from this expenditure, maximising your flooring will require bit more than effort and your option of wax, paint or varnish.

When you’ve coated the whole floor (normally with two coats of sealant and 2 or three of varnish/paint), furnish with soft carpets to give the space a warm, welcoming feel.

Mirror, Mirror

Aside from their functional usage, mirrors can boost a room as they bounce light around even the tiniest of spaces, giving the illusion of space. Keep an eye out for old and fascinating mirrors and frames and make a feature wall by hanging them together in a cluster, sprinkled with framed artwork or photos.

It’s best to plan out your cluster on paper initially, consisting of the dimensions of your wall and all the mirrors, to guarantee they fit and are organised to look aesthetically enticing. After you’ve completed a plan, mark out where to drill or hammer using a pencil or piece of tailors chalk. Keep a vacuum on hand if you’re drilling into brickwork, as the dust can stain walls and skirting boards.

Shine On

Lighting is critically important when it comes to setting the tone and environment of a room. Think about maximising yours by making your own lampshades for flooring or table lamps.

Wire frame rings can be found in craft shops and online hardware stores, and you’ll also need material of your choice and PVC backing product.

Iron your fabric to eliminate any undesirable creases and carefully measure it out, not forgetting to consist of an overlap. As soon as you’ve used the backing product to your fabric (which will offer it structure and secure it from inadvertently touching the light bulb) it’s time to use double-sided material sticky tape to the within the fabric, and carefully connect to your frames.

As soon as you master this you need to have the ability to knock up a ceiling lampshade and 2 matching table lampshades in one afternoon.

All of these ideas will take no longer than weekend, so what are you waiting on?

Post Sponsored by

Is your Driveway Driving you Mad?

Driveways: the worse the condition, the more enforcing they appear. You may not have one as long as the Mall in front of Buckingham Palace– but cracks and pits may appear in time and greet you after a long day at work. The solution: resurfacing.

I had my own resurfaced this summertime, and it was far less of a disruption than I envisioned. There was no unearthing of live cables or pipes breaking and flooding the neighbours. In the end, the procedure was as smooth as my gorgeous brand-new driveway.

What do you require the driveway for?

Prior to starting-in on the job, it assists to determine what you desire from your brand-new driveway. Do you simply desire to smooth out the surface area, or do you require more space?

I required my driveway resurfaced and expanded for 2 factors: One because I was fed up with stepping into a rose bush every time I got out the car. The other was to acquire space in order to push the buggy with our new arrival past the automobile. Oh, and there’s a 3rd, more important reason: so I could manoeuvre my motorbike round the parked car to get in and out of the garage.

Which surface area?

Few people will need a surface as flat and smooth as a dance flooring– yet there are lots of materials your driveway can be laid with. Each has its own advantages and disadvantages and expense– I believe the whole task expense me around ₤ 2000. Depending on your circumstances, a loan could be an ideal method to pay for it.

  • Small slabs-– I selected pieces due to the fact that I desired a low cost, attractive, yet difficult surface for the automobile and my motorcycle to be driven on. It needed to be flexible, load-bearing and something I could sweep clean.
  • Large slabs– these were previously laid in two rows to supply a track for the automobile. I guess they were laid back in the sixties but stood the test of time well for nearly a half a century.
  • Gravel-– this was formerly laid between the big slabs, the least expensive alternative and helpful for drain. Its benefit is that you can conceal after hearing traveling sales mans approach your home. Its failure is that the ‘crunching noise’ will betray your existence after returning house from a late night out …
  • Tarmac– this is among the more costly options and offers a flat, level surface with good weight-bearing residential or commercial properties. I didn’t go down this route because the surface area encountered our house, however it could be simply what you’re trying to find.

Fab slabs …

I commissioned a buddy who is a landscape gardener to lay the drive, and I know he had fun doing it. He laid it over a (long forgotten) uncommon warm and sunny week in Scotland in May. The satisfying part (for me at least) was cleaning out the deep-rooted shrubs in the old border where the brand-new slabs were to be laid. We huffed, puffed, removed and transplanted some of the shrubs.

Like a good friend, I left him to do the effort which was getting the sub-base exactly level so he could lay the slabs. Watching an expert at work was appealing: Pause, procedure, pause … He considered the task up with the examination of a swimming pool gamer taking a challenging shot. The pieces were elaborately laid in brick pattern, although a V-formation would also have actually done the trick. After about five days’ difficult graft, generous cups of tea, sweat and labor, my driveway was total. The end outcome? Remarkable.

Post Sponsored by

How to Revitalise an Old Wooden Floor

If you are lucky enough to have a wood flooring in your home you will realise that whilst they look excellent, they are difficult to care for. A lot of upkeep is needed but if you have actually ignored the routine cleansing and varnishing routine, your flooring might be in need for some revitalisation. Never ever fear; follow these easy standards to give your gorgeous flooring a makeover to restore it to its previous magnificence.

Preparing to Revitalise a Wooden Floor

First of all, make sure you are gotten ready for the job so you will require the necessary tools to perform the jobs. To help you in invigorating the flooring, make certain you have the following to hand:

  • Safety glasses and dust mask
  • Vacuum cleaner
  • Long roller and tray
  • Varnish
  • Great sandpaper
  • Floor sander

You’ll likewise require to prepare your floor prior to you start dealing with it, to make sure that it’s in as great a condition as possible so have a mop and bucket, bicarbonate of soda, vinegar and warm water on hand.

Cleaning Your Wooden Floor
Prior to you sand the flooring you will need to ensure it’s clean. Get rid of all of the furniture in your room and start by vacuuming it thoroughly, using the attachment to tidy between the boards. Take your time and be thorough as this will conserve you a lot of time in the long term. Next combine warm water, bicarbonate of soda and vinegar in your mop pail. Use your mop to blend them together completely. Using long strokes, tidy your wood floor with the mop and use a tooth brush to get in between the boards. Make sure the flooring is thoroughly dry before moving onto the next phase.

Sanding The Floor
Before you begin you must make certain to fill any little holes with wood filler, and to hammer in nails so they’re flush with your flooring. Open doors and windows for ventilation and use your security goggles and dust mask. Sanding will remove the existing stain on your old wooden floor, what is left of it anyhow, and reveal a fresh layer of wood underneath. Use a belt sander for small areas, or employ a larger sander for larger areas. If you do choose to sand your own floor, work diagonally and use a mouse sander for corners. Vacuum, then sand again. Just sand in the direction of your floorboards if your floor is in good repair work. Leave for 24hrs after sanding, then vacuum once again to get rid of all dust. Ensure you do a good task here as any left over dust will mix with the varnish when applying it and will hinder the end result.

Using Varnish to Your Floor
Clear varnish will enhance the natural appearance of your flooring, whereas coloured varnish will give your room a darker feel. Have a consider what design your space is going to have when all the furniture has actually been changed and this must give you a helping hand in choosing what shade varnish to opt for. When you are ready, use a roller to apply varnish in the direction of wood grain and use in the corners using a brush. Your floor will need a minimum of 3 applications, and prior to you begin the final coat make certain to rub your wooden floor down with fine sandpaper before wiping clean. Lastly, leave your floor to dry for at least 8 hours.

Your old wooden floor will now look as good as new!

Post Sponsored by